HP MPX200 Multifunction Router - Manual (Page 176)

path A path to a device is a combination of an adapter port instance and a target port as distinct from
internal paths in the fabric network. A fabric network appears to the operating system as an
opaque network between the initiator and the target.
ping A computer network administration utility used to test whether a specified host is reachable across
an IP network, and to measure the round-trip time for packets sent from the local host to a
destination computer.
port Access points in a device where links attach.
There are four types of ports, as follows:
•
N_Port—an FC port that supports point-to-point topology.
•
NL_Port—an FC port that supports loop topology.
•
F_Port—a port in a fabric where an N_Port can attach.
•
FL_Port—a port in a fabric where an NL_Port can attach.
port instance The number of the port in the system.
PV Physical volumes
PVLinks Physical volume links
R
RCLI Remote Command Line Interface. A utility that you can use to configure and manage the HP
MPX200 Multifunction Router.
RDAC Redundant Disk Array Controller
RHEL Red Hat Enterprise Linux
router log A log that contains messages router events.
RPC Remote procedure call. A protocol used by a program to request a service from a program located
in another computer in a network.
RTT Round-trip time
S
Secure Shell See SSH .
SLES SUSE Linux Enterprise Server
SNMP Simple Network Management Protocol
SPOCK Single point of connectivity knowledge
SSH Secure shell. A protocol that secures connections to the switch for the command line interface.
SVSP HP SAN Virtualization Services Platform
T
target The storage-device endpoint of a SCSI session. Initiators request data from targets (typically media
devices).
TB Terabytes
Telnet Software that implements the client part of the protocol. Telnet clients are available for nearly all
computer platforms. Because of security issues with Telnet, its use has declined in favor of SSH
for remote access.
U
USP Universal Storage Platform
V
VLAN Virtual local area network. A group of hosts with a common set of requirements that communicate
as if they were attached to the same wire, regardless of their physical location.
176 Glossary