HP MPX200 Multifunction Router - Manual (Page 132)

WWPN 50:00:1f:e1:50:0a:e1:48
WWNN 50:00:1f:e1:50:0a:e1:40
Port ID 82-0c-00
nl VPGroup 1
Name iqn.1986-03.com.hp:fcgw.mpx200.0851e00035.b1.01.50001fe1500a3718
nl
nl WWPN 50:00:1f:e1:50:0a:37:18
WWNN 50:00:1f:e1:50:0a:37:10
Port ID 82-04-00
VPGroup 1
Name iqn.1986-03.com.hp:fcgw.mpx200.0851e00035.b1.01.5006016241e0492e
nl
nl
WWPN 50:06:01:62:41:e0:49:2e
WWNN 50:06:01:60:c1:e0:49:2e
Port ID 82-01-00
VPGroup 1
nl .
nl .
nl .
nl Name iqn.1986-03.com.hp:fcgw.mpx200.0851e00035.b1.02.50001fe1500a371c
nl
nl
WWPN 50:00:1f:e1:50:0a:37:1c
WWNN 50:00:1f:e1:50:0a:37:10
Port ID 82-03-00
VPGroup 2
The following example shows the show presented_targets command for FC ports.
nl MPX200 <1> (admin) #> show presented_targets fc
Presented Target Information
------------------------------
FC/FCOE Presented Targets
----------------------
WWPN 21:05:00:c0:dd:13:17:34
WWNN 20:05:00:c0:dd:13:17:34
Port ID 01-02-03
Port FC1
nl
nl
Name iqn.1992-08.com.netapp:dta.0834e00029.b1
show properties
Displays the CLI properties.
Authority
guest
Syntax
show properties
Examples
The following example shows the show properties command:
nl
nl
MPX200 <1> #> show properties
nl
CLI Properties
----------------
Inactivty Timer 15 minutes
Prompt String MPX200
show remotepeers
Displays detailed information about the remote router peer system, including the router IP address,
iSCSI name, and status.
Authority
guest
132 Command line interface