Targetmap – HP MPX200 Multifunction Router User Manual

Page 137

Syntax

target

Keywords

rescan

Examples

The following example shows the target rescan command:

mpx200 (admin) #> target rescan

Scanning Target WWPN 00:00:02:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 00:00:03:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 00:00:01:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 50:08:05:f3:00:1a:15:11

Target Rescan done

Scanning Target WWPN 50:08:05:f3:00:1a:15:19

Target Rescan done

Target Re-Scan completed

To rescan targets in the CLI:
1.

Open a miguser session using the following command:

miguser start -p config

To rescan for target ports, enter the following command:

target rescan

For example:

mpx200 (admin) #> target rescan

Scanning Target WWPN 00:00:02:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 00:00:01:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 00:00:03:00:00:00:00:00

Target Rescan done

Scanning Target WWPN 50:08:05:f3:00:1a:15:11

Target Rescan done

Scanning Target WWPN 50:08:05:f3:00:1a:15:19

Target Rescan done

Target Re-Scan completed

targetmap

Presents or removes existing presentation of discovered FC and iSCSI targets on FC, iSCSI, and
FC over Ethernet (FCoE) ports.

Authority

admin

Syntax

targetmap

Commands

137