HP MPX200 Multifunction Router - Manual (Page 57)

Figure 24 Create data migration job dialog box
3. Create the data migration job by dragging and dropping the LUNs. The method depends on
the job creation method selected in
Step 7
•
If the job creation method is Create job by dragging LUNs into the Data Migration Jobs
pane, drag and drop the source LUN and the destination LUN from the left and middle
panes onto the Data Migration Job (New) mode in the right pane.
•
If the job creation method is Create job by dragging LUNs from the Source LUNs pane to
the Destination LUNs pane, drag and droop the source LUN from the left pane onto the
destination LUN in the middle pane.
NOTE: If you attempt to drop a source LUN from the left pane onto a destination LUN of a
smaller size in the middle pane, an error message notifies you of the size discrepancy.
Destination arrays that are imported are indicated by [Imported] following the array
name in the middle pane.
The Data Migration Jobs Options opens. See the example in Figure 25 (page 57) .
Figure 25 Data migration jobs options dialog box
Using the data migration wizard 57