HP MPX200 Multifunction Router - Manual (Page 70)

2. Complete the Create Data Management LUN Wizard as follows:
a.
Select a storage array for this DML.
b. Expand a VPGROUP_n node, and then select one or more LUNs by selecting the check
box to the left of each.
Figure 34 (page 70) shows an example.
Figure 34 Create data management LUN wizard
c. To save your changes and close the wizard, click OK.
The wizard verifies that all LUNs selected for the DML meet the following criteria:
nl •
The LUN is not already used as a DML.
•
The LUN is not mapped to an initiator.
•
The LUN is not currently part of a migration, compare, or scrub job.
•
The LUN is a minimum of 50 GB.
•
The LUN is online on both of the blades.
If the LUN does not meet all of the preceding criteria, the wizard rejects the LUN, and the
DML creation operation fails with the appropriate error message.
3. (Optional) To view the attributes of a DML, select a DML node under Data Management LUNs
in the HP mpx Manager system view pane. The Data Management LUN Info page appears
in the right pane;
Figure 35 (page 71) shows an example.
70 Performing data migration