Configuring secure file copy – HP Brocade 4Gb SAN Switch for HP BladeSystem p-Class User Manual

Page 69

•

connUnitPortStatusChange

indicates that the status of the sensor associated with the

connectivity unit has changed.

•

connUnitPortStatus

shows overall protocol status for the port.

•

connUnitPortState

shows the user-specified state of the port hardware.

Use the

snmpmibcapshow

command to view the SNMP MIB trap setup. For example:

Configuring secure file copy

Use the

configure

command to specify that secure file copy (scp) be used for configuration uploads

and downloads. For example:

switch:admin> snmpmibcapshow

FA-MIB: YES

FICON-MIB: YES

HA-MIB: YES

SW-TRAP: YES

swFCPortScn: YES

swEventTrap: YES

swFabricWatchTrap: YES

swTrackChangesTrap: YES

FA-TRAP: YES

SW-EXTTRAP: YES

HA-TRAP: YES

fruStatusChanged: YES

cpStatusChanged: YES

fruHistoryTrap: YES

switch:admin> configure

Not all options will be available on an enabled switch.

To disable the switch, use the “switchDisable” command.

Configure...

System services (yes, y, no, n): [no] n

ssl attributes (yes, y, no, n): [no] n

http attributes (yes, y, no, n): [no] n

snmp attributes (yes, y, no, n): [no] n

rpcd attributes (yes, y, no, n): [no] n

cfgload attributes (yes, y, no, n): [no] y

Enforce secure config Upload/Download (yes, y, no, n): [no] y

switch:admin>