HP Brocade 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 41)

Fabric OS 5.0.0 procedures user guide 41
To enable telnet:
1. Connect to the switch through a means other than telnet (for example, SSH) and log in as admin.
2. Issue the following command:
configure telnetd
3. In response to the System Services prompt, enter
y.
4. In response to the telnetd prompt, enter
on
.
The telnet interface is enabled.
Blocking listeners
HP StorageWorks switches block Linux® subsystem listener applications that are not used to implement
supported features and capabilities. Table 5 lists the listener applications that HP StorageWorks switches
either block or do not start.