HP Brocade 4Gb SAN Switch for HP BladeSystem p-Class User Manual

Page 66

Configuring standard security features

Use the

agtcfgset

command to modify the SNMP configuration values. For example:

switch:admin> agtcfgset

Customizing MIB-II system variables ...

At each prompt, do one of the followings:

o to accept current value,

o enter the appropriate new value,

o to skip the rest of configuration, or

o to cancel any change.

To correct any input mistake:

erases the previous character,

erases the whole line,

sysDescr: [FC Switch]

sysLocation: [End User Premise]

sysContact: [Field Support.]

authTrapsEnabled (true, t, false, f): [true]

SNMP community and trap recipient configuration:

Community (rw): [Secret C0de]

Trap Recipient's IP address in dot notation: [192.168.1.51]

Trap recipient Severity level : (0..5) [0] 3

Community (rw): [OrigEquipMfr]

Trap Recipient's IP address in dot notation: [192.168.1.26]

Trap recipient Severity level : (0..5) [0]

Community (rw): [private]

Trap Recipient's IP address in dot notation: [0.0.0.0] 192.168.64.88

Trap recipient Severity level : (0..5) [0] 1

Community (ro): [public]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (ro): [common]

Trap Recipient's IP address in dot notation: [0.0.0.0]

Community (ro): [FibreChannel]

Trap Recipient's IP address in dot notation: [0.0.0.0]

SNMP access list configuration:

Access host subnet area in dot notation: [0.0.0.0] 192.168.64.0