HP Brocade 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 68)

68 Configuring standard security features
Use the
snmpmibcapset
command to modify the options for configuring SNMP MIB traps. For
example:
These notes apply to
snmpmibcapset
parameters for the FA-TRAP:
•
connUnitStatusChange
indicates that the overall status of the connectivity unit has changed. Its
variables are:
•
connUnitStatus
is the status of the connection unit
•
connUnitState
is the state of the connection unit
•
connUnitEventTrap
indicates that the connectivity unit has generated an event. Its variables are:
•
connUnitEventId
is the internal event ID
•
connUnitEventType
is the type of this event
•
connUnitEventObject
is used with the
connUnitEventType
to identify the object to which the
event refers.
•
connUnitEventDescr
is the description of the event.
•
connUnitSensorStatusChange
indicates that the status of the sensor associated with the
connectivity unit has changed.
•
connUnitSensorStatus
is the status indicated by the sensor.
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB
SW-MIB
FA-MIB
FA-TRAP
FA-MIB (yes, y, no, n): [yes]
FICON-MIB (yes, y, no, n): [no] y
HA-MIB (yes, y, no, n): [no] y
SW-TRAP (yes, y, no, n): [no] y
swFCPortScn (yes, y, no, n): [no]
swEventTrap (yes, y, no, n): [no]
swFabricWatchTrap (yes, y, no, n): [no]
swTrackChangesTrap (yes, y, no, n): [no]
FA-TRAP (yes, y, no, n): [yes]
connUnitStatusChange (yes, y, no, n): [no]
connUnitEventTrap (yes, y, no, n): [no]
connUnitSensorStatusChange (yes, y, no, n): [no]
connUnitPortStatusChange (yes, y, no, n): [no]
SW-EXTTRAP (yes, y, no, n): [no] y
FICON-TRAP (yes, y, no, n): [no] y
linkRNIDDeviceRegistration (yes, y, no, n): [no]
linkRNIDDeviceDeRegistration (yes, y, no, n): [no]
linkLIRRListenerAdded (yes, y, no, n): [no]
linkLIRRListenerRemoved (yes, y, no, n): [no]
linkRLIRFailureIncident (yes, y, no, n): [no]
HA-TRAP (yes, y, no, n): [no] y
fruStatusChanged (yes, y, no, n): [no]
cpStatusChanged (yes, y, no, n): [no]
fruHistoryTrap (yes, y, no, n): [no]
Avoid-Duplicate-TRAP (yes, y, no, n): [no] y
switch:admin>