Building for both oss and guardian, Manage configurations dialog – HP Integrity NonStop J-Series User Manual
Page 94
9.
Select the Add button
to open the Enter Value dialog.
10.
Enter –Wdef_obey=C:\mydefines.txt in the Enter Value dialog, then select OK.
11.
Select OK to apply your change and dismiss the Properties dialog.
Building for both OSS and Guardian
When you create a project with managed builds, the initial project is set up to build for OSS or
Guardian, but not both. To build a project for both OSS and Guardian, create new build
configurations and set the TARGET_SYSTYPE build macro to a different value in the new
configurations.
Consider, for example, a project named HelloWorld that was created to be built for OSS and
TNS/E. From the NonStop Development perspective, you would perform the following steps to add
build configurations that build for Guardian:
1.
Select the HelloWorld project in the NonStop Project Explorer view.
2.
Select Build Configurations
→Manage… from the context menu of the NonStop Project Explorer
view to open the Manage Configurations dialog:
Figure 51 Manage Configurations dialog
3.
Select New… to open the Create New Configuration dialog (
) which you
will use to create a new build configuration.
94
Tasks