Configuring connections to nonstop, Adding network connection preferences, New project wizard for connection configurations – HP Integrity NonStop J-Series User Manual
Page 68

1.
Select Configure Tool Locations... from the NonStop Tools menu.
2.
On the Tool Locations preference page, select the Cygwin/Msys tab.
3.
On the Cygwin/Msys page, enter the Cygwin bin directory path in the Cygwin bin: field or
the Msys bin directory path in the Msys bin: field. Alternatively, select Browse... to open a
directory browser to find the location.
4.
Select OK.
Configuring connections to NonStop
The Network Connections preferences page provides a central location to add and configure
network connections to NonStop systems. NSDEE manages NonStop system connection information
using named connection configurations, where the names take the form:
system_name_or_IP (user_ID_or_alias)
You can create any number of these configurations. Each configuration specifies the connection
protocol (SSH/SFTP or Telnet/FTP) and any optional protocol-specific settings. Share these
configurations between workspaces using export and import wizards.
These connection configurations are available through combo boxes in project creation wizards,
project properties, and various tools.
shows an example of a new project
wizard with a combo box containing three separate connection configurations.
Figure 19 New project wizard for connection configurations
Adding network connection preferences
To add network connections to NonStop systems, perform the following steps from the NonStop
Development perspective:
1.
To open the Network Connections preference page, select NonStop Tools
→Configure
Connections...
68
Tasks