New folder wizard (expanded view), Linked folder contents – HP Integrity NonStop J-Series User Manual
Page 124
network drives mapped to Samba mount points so you can drag and drop folders and files between
NonStop and your Eclipse project. This also allows you to open and edit remote files directly in
Eclipse in the same manner you would open and edit local files.
To create a linked folder to a network drive, consider the following scenario: Say you have drive
S:
mapped to an OSS location on a NonStop system and you want to create a linked folder
(NonStopFolder) to that location in a project named TestProj. To create the link, perform the following
steps from the NonStop Development perspective:
1.
Select TestProj in the NonStop Project Explorer view.
2.
Select New
→Folder from the context menu.
3.
In the Folder field: of the New Folder wizard, enter NonStopFolder.
4.
Select Advanced>> to expand the advanced area of the New Folder wizard.
5.
Select the Link to alternate location button and enter S:\in the field below the button.
shows the New Folder wizard with the advanced area expanded and
the information specified in steps 3 and 5 entered.
6.
Select Finish.
Figure 83 New Folder wizard (expanded view)
After you select Finish, NSDEE creates a linked folder
under your project (as shown in
). Expand the folder to view the contents of the location the network drive is mapped to.
Figure 84 Linked folder contents
124
Tasks