Remote makefile project wizard – HP Integrity NonStop J-Series User Manual
Page 85
Figure 37 Remote Makefile Project wizard
2.
Enter a project name in the Project name: field.
3.
Select the remote NonStop project host system using the Build system: combo box. To add
systems to the combo box, select Edit... to open Network Connection preferences.
4.
In the Platform: row, select OSS to use OSS tools, or Guardian to use Guardian tools.
5.
Enter the project file system location in the Project location: field, or select Browse... to browse
for the location.
6.
If the Connect to Build System... button is enabled, select it now to establish a connection to
the remote NonStop system you specified in step 3.
7.
Under Referenced remote makefile projects:, select any remote projects that must build before
this projectTo continue to the Select Configurations page, select Next >. For details, see
. This page shows the default build configurations created. Deselect any
build configurations you do not want included in your project. This page is provided by CDT.
For more information, see the C/C++ Development User Guide..
8.
Select Next > to continue to the Build Settings page.
shows the Build
Settings page as it appears if you selected the Guardian platform in step 4.
Creating projects
85