HP Integrity NonStop J-Series - Manual (Page 131)

To use SSH:
•
Open the Terminal Settings dialog by clicking on the Settings push button on the toolbar.
•
Select SSH from the Connection Type drop down menu.
•
Enter the host, user, and password.
•
Click OK.
Target Management terminal limitations
•
The Guardian command tedit is not supported.
•
The block mode is not supported.
•
For SSH connections, the OSH command exit terminates the connection instead of taking
you back to the TACL prompt.
•
SSH connections usually take you to an OSH prompt. To switch to a TACL prompt, enter
gtacl
at the OSH prompt and re-enter login credentials. For example:
/: gtacl
TACL 1> logon super.super
Password:
Views and editors 131