HP Integrity NonStop J-Series - Manual (Page 69)

Figure 20 Network Connections preferences page
2. On the preference page, select Add/Remove...
3. In the Add or Remove Connection Configurations dialog, enter an IP address or a system
name in the System: field and click the Add button.
TIP: If one or more remote connections are already configured and you want to reuse the
settings from an existing configuration, select it in the list of connection configurations, then
select Copy, and then OK. As a result, the System combo contains a copy of the system name
selected, the User name: field is empty, and your preferred protocol and settings are identical
to the copied configuration. Optionally, alter the system name and add a user name.
Figure 21 Add or Remove Connection Configurations dialog
Configuring connections to NonStop 69