HP Officejet Pro X576 Multifunction Printer series - Manual (Page 208)

NOTE: Memory errors might occur if the faxes are not printed. The product will not answer if the
memory is full.
Sender receives a busy signal
A handset is connected to the product
● Make sure the phone is hung up.
● Change the Answer Mode option to match the product setup.
a. From the Home screen, touch the Setup button.
b. Open the Fax Setup menu.
c. Open the Basic Fax Setup menu.
d. Open the Auto Answer menu.
e. Select On .
A phone line splitter is being used
● If you are using a phone line splitter, remove the splitter and set up the phone as a downstream
phone.
● Make sure the phone is hung up.
● Make sure the phone is not being used for a voice call when faxing.
No dial tone
● If using a phone line splitter, remove the phone line splitter and set up the phone as a downstream
phone.
Cannot send or receive a fax on a PBX line
● If you are using a PBX phone line, contact your PBX administrator to configure an analog fax line
for your product.
192 Chapter 12 Fax ENWW