Solve fax problems, Fax troubleshooting checklist – HP Officejet Pro X576 Multifunction Printer series User Manual
Page 190
Solve fax problems
Fax troubleshooting checklist
●
Several possible fixes are available. After each recommended action, retry faxing to see if the
problem is resolved.
●
For best results during fax problem solving, make sure the line from the product is plugged directly
into the wall phone port. Disconnect all other devices that are connected to the product.
1.
Verify that the telephone cord is plugged into the correct port on the back of the product.
2.
Check the phone line by using the fax test:
a. On the control panel, open the
Setup
menu, and then open the
Fax Setup
menu.
b. Select the
Fax Tools
button.
c.
Select the
Run Fax Test
option. The product prints a fax test report.
The report contains the following possible results:
●
Pass: The report contains all of the current fax settings for review.
●
Fail: The cord is in the wrong port. The report contains suggestions for how to resolve
the issue.
●
Fail : The phone line is not active. The report contains suggestions for how to resolve
the issue.
3.
Verify that the product firmware is current:
a. Print a configuration page from the control panel
Print Reports
menu to obtain the current
firmware date code.
b. Go to
.
1.
Click the Support & Drivers link.
2.
Click the Download drivers and software (and firmware) link option.
3.
In the For product box, type the product model number, and then click the Go button.
174
Chapter 12 Fax
ENWW