HP Officejet Pro X576 Multifunction Printer series - Manual (Page 179)

Use fax
Fax software
Supported fax programs
The PC fax program that came with the product is the only PC fax program that works with the product.
To continue to use a PC fax program previously installed on the computer, use the modem that is
already connected to the computer; it will not function through the product modem.
Cancel a fax
Use these instructions to cancel a single fax that is currently dialing or a fax that is being transmitted or
received.
Cancel the current fax
Press the Cancel button on the control panel if the current job screen has not timed out. You may
also go to the status bar and select the job to cancel it after it has timed out.
Cancel a pending fax job
Use this procedure to cancel a fax job in the following situations:
● The product is waiting to redial after encountering a busy signal, an unanswered call, or a
communication error.
● The fax is scheduled to be sent at a future time.
Use the following steps to cancel a fax job by using the Fax Job Status menu:
1. From the Home screen, touch the Fax button.
2. Touch the Fax Job Status button.
3. Touch the fax number for the job that you want to cancel.
Use fax on a DSL, PBX, or ISDN system
HP products are designed specifically for use with traditional analog phone services. They are not
designed to work on DSL, PBX, ISDN lines, or VoIP services, but they work with the proper setup and
equipment.
NOTE: HP recommends discussing DSL, PBX, ISDN, and VoIP setup options with the service provider.
The HP Officejet product is an analog device that is not compatible with all digital phone environments
(unless a digital-to-analog converter is used). HP does not guarantee that the product will be compatible
with digital environments or digital-to-analog converters.
ENWW Use fax 163