HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 90)

Virtual Connect networks 90
o On the Alphabetical tab, click a letter to show only network names that begin with that group of
letters, or click All to show all networks alphabetically.
o On the Filtered tab, use the pull-down menus to define the filter criteria, and then click Go.
3. Drag and drop the networks that should be included as members of the network access group from the
Excluded Networks field to the Included Networks field.
4. Click Apply.
Edit Network Access Group screen
To access this screen:
• Click the Edit link for a network access group on the Network Access Groups screen (on page 88 ).
• Enter a network access group name in the Find Configuration Items search field in the left navigation
tree, and then select the network access group.
Use this screen to edit the properties of an existing Network Access Group.
This screen can only be edited by users with network role permissions, but it is viewable by all authorized
users.
To edit a network access group:
1. Enter a new name for the network access group in the Network Access Group Name field. The name
can consist of up to 64 alphanumeric characters, including the hyphen (-), underscore (_), and period
(.). You cannot rename the Default network access group.
2. To filter the list of available networks, do one of the following:
o On the Alphabetical tab, click a letter to show only network names that begin with that group of
letters, or click All to show all networks alphabetically.
o On the Filtered tab, use the pull-down menus to define the filter criteria, and then click Go.