HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 27)

Virtual Connect domains 27
Virtual Connect Manager imports the enclosure and provides status information.
Removing a remote enclosure
To remove a remote enclosure, disassociate all profiles, networks, port sets, and port monitors from the
enclosure. If the enclosure is currently in a No-COMM state, the remote enclosure remains in VC Mode. Take
the enclosure out of VC mode manually with the OA command line for that enclosure.
To remove a remote enclosure:
1. Go to the Domain Settings (Enclosures) screen (on page 24 ).
2. Click the Delete link in the Action column.
-or-
Left-click on the enclosure row, right-click to display a menu, and then select Delete.
Domain Settings (Backup/Restore) screen
Use this screen to create a backup file of the Virtual Connect domain configuration to restore a configuration
that has been lost, or to revert to a previously saved configuration. The domain configuration includes
network definitions, MAC address settings, WWN settings, Fibre Channel fabric settings, local user
accounts, and server profile definitions. The backup file stores the same information that is check-pointed
between the primary and backup modules during normal operation.