HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 39)

Virtual Connect domains 39
Enclosure reason code Description
vcEnclosureUnknown The condition of the enclosure cannot be determined, or the state of
servers or modules is unknown.
vcModuleManagedStatusChanged
The following is an example of a module Cause string:
Port enc0:iobay5:d3:v1 loop detected and automatically disabled
The following is an example of a module RootCause string:
Port enc0:iobay5:d3:v1 loop detected and automatically disabled
The module managed status ReasonCodes are provided in the following table.
Module reason code Description
vcEnetmoduleOk The Ethernet module is functioning normally.
vcEnetmoduleEnclosureDown The module is unable to communicate with the enclosure/OA.
vcEnetmoduleModuleMissing A configured module has been removed.
vcEnetmodulePortprotect A condition has been detected on the port causing port protection to
be activated.
vcEnetmoduleIncompatible The module is incompatible, for example, a configured Enet module
is replaced with an FC module.
vcEnetmoduleHwDegraded The module is being reported as degraded by the OA.
vcEnetmoduleUnknown The condition of the module is unknown.
vcFcmoduleOk The FC module is functioning normally.
vcFcmoduleEnclosureDown
The FC module is unable to communicate with the enclosure/OA.
vcFcmoduleModuleMissing A configured module has been removed.
vcFcmoduleHwDegraded The module is reporting a degraded hardware condition.
vcFcmoduleIncompatible The module is incompatible, such as replacing a configured FC
module with an Enet module.
vcFcmoduleUnknown The condition of the module is unknown.
vcPhysicalServerManagedStatusChanged
The following is an example of a physical server Cause string:
Server enc0:dev1 unable to communicate with enclosure enc0
The following is an example of a physical server RootCause string:
Server enc0:dev2 profile pending
The physical server managed status ReasonCodes are provided in the following table.
Physical server reason code Description
vcPhysicalServerOk The server is functioning normally.
vcPhysicalServerEnclosureDown The server is unable to communicate with the enclosure/OA.
vcPhysicalServerFailed The server is in a failed condition.
vcPhysicalServerDegraded The server is in a degraded condition.
vcPhysicalServerUnknown The condition of the server is unknown.
vcFcFabricManagedStatusChanged
The following is an example of a FC fabric Cause string:
1 of 2 uplink ports are abnormal on BackupSAN fabric