HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 219)

Virtual Connect server profiles 219
d. Click the HP ProLiant BL680c G7 Server Blade device bay in the Hardware Overview section in the
left navigation tree. The Server Bay Status screen appears. Be sure that the Power Status/Control
status value is Off.
e. Scroll down to the Server Ethernet Adapter Information section and be sure that no assigned SAN
fabric appears in the Network column for the HP ProLiant BL680c G7 Server Blade.
General requirements for adding FC or FCoE connections
Adding FC and FCoE connections is generally allowed during profile add and edit operations. It is not
allowed in some specific cases. Observe the following general requirements: