HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 208)

Virtual Connect server profiles 208
Task Action
Change the SAN fabric
connection
Click the pull-down arrow in the FC SAN name box.
Change or disable the port speed Click the pull-down arrow in the Port Speed box.
View Fibre Channel Boot
Parameters
Select the Fibre Channel Boot Parameters checkbox.
Enable Fibre Channel Boot on a
port
Select the Fibre Channel Boot Parameters checkbox. Click the pull-down
arrow in the SAN Boot box, and then select the boot order. Enter a valid Boot
Target name and LUN in the edit boxes.
Disable Fibre Channel Boot on a
port Select the Fibre Channel Boot Parameters checkbox. Click the pull-down
arrow in the SAN Boot box, and then select Disabled.
Revert to BIOS settings for Fibre
Channel Boot
Select the Fibre Channel Boot Parameters checkbox. Click the pull-down
arrow in the SAN Boot box, and then select Use BIOS.
Change the profile bay
assignment Select a new bay from the server pull-down menu at the bottom or the screen,
or select Unassigned.
Change the FCoE connection Click the pull-down arrow in the FC SAN/FCoE Network Name box.
Change the FCoE port speed Click the pull-down arrow in the Port Speed name box.
Clear unsaved changes on the
screen Click Clear.
Save changes Click Apply to save changes and remain on the edit screen, or Apply & Close
to save changes and return to the Server Profiles screen.
Cancel without saving changes Click Cancel.
Assigning a server profile with FCoE connections to an HP ProLiant
BL680c G7 Server Blade
To create a server profile with FCoE connections, and then assign it to an HP ProLiant BL680c G7 Server
Blade:
1. Be sure that the HP ProLiant BL680c G7 Server Blade is installed correctly and powered down:
a. Click Overview under Hardware in the left navigation tree to display the Enclosures View screen.