HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 37)

Virtual Connect domains 37
Trap name Trap data Description
vcModPortBpduLoopDetected port identification
loop status
A network loop condition is detected on this port. If the
loop condition is detected on a Flex10 port, the trap data
indicates the physical port associated with the Flex10
port.
If multiple Flex10 ports on a physical port detect a loop
condition, a separate trap is sent for each occurrence of
the loop condition.
vcModPortBpduLoopCleared port identification
loop status
A network loop condition is cleared on this port. The trap
data indicates the physical port associated with a Flex10
port.
For Flex10 ports, this trap is sent only after all Flex10
ports on a physical port are cleared from a loop
condition.
vcModPortProtectionConditio
nDetected
Port index to the
ifTable (ifIndex)
Port index to the
vcModulePortTable
Port protection status
A port protection condition is detected on this port. If the
new port protection status is a value other than OK, the
port may be disabled to protect the VC module from
further service degradation. Administrative action is
required to recover the port from this condition.
vcModPortProtectionConditio
nCleared Port index to the
ifTable (ifIndex)
Port index to the
vcModulePortTable
Port protection status
The port is recovered from port protection condition to
normal operational state.
VC Domain MIB traps
The Virtual Connect vc-domain-mib.mib MIB provides visibility into the various components of a Virtual
Connect Domain.
VC Domain Managed Status Changed traps
This section describes the *ManagedStatus, *Cause, *RootCause, and *ReasonCode OIDs found in each
*ManagedStatusChanged traps in the VC Domain MIB.
The ManagedStatus enumerations (vcDomainManagedStatus, vcEnclosureManagedStatus, and so on) for
all managed status changed objects (vcDomainManagedStatusChanged,
cEnclosureManagedStatusChanged, and so on) are described in the following table.
Managed status Description
unknown Indicates the condition of the component could not be determined
normal Indicates the component is fully functional
warning Indicates a component threshold has been reached or error condition is imminent
minor Indicates an error condition exists that has little or no component impact
major Indicates an error condition exists that significantly impairs the component
critical Indicates an error condition exists where the component no longer provides service
disabled Indicates the component is disabled and non-functioning
info Indicates a non-service affecting condition exists such as initializing components and
system login/logout