HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem - Manual (Page 213)

Virtual Connect server profiles 213
f. In the Assign Profile to Server Bay section, select the bay for the HP ProLiant BL680c G7 Server
Blade to which you want to assign the server profile from the Unassigned Server pull-down list.
g. Click Apply to save changes and stay on this screen, or click Apply & Close to save changes and to
go the Server Profiles summary screen.
h. On the Server Profiles screen, be sure that the server profile with FCoE connections has been
properly assigned.
4. Power up the HP ProLiant BL680c G7 Server Blade:
a. Click the device bay for the HP ProLiant BL680c G7 Server Blade in the Server Bay Assignment
column of the Server Profiles screen, or from the Device Bays link in the Hardware section in the left
navigation tree. The Server Bay Status screen appears.