HP Matrix Operating Environment Software - Manual (Page 89)

Prerequisites:
• You must be editing a scenario (see “Editing a scenario” (page 88) )
NOTE: Changes to the data collection period persist across sessions.
1. Click Edit Interval within the Set Data Range box.
The fields are enabled as shown in the following image.
2. Click the first drop-down arrow to the left to see the choices for the duration of the data
collection period that you want to use.
Choose one to view in the display. The choices are as follow:
• Day
• Week (default)
• Month
• Quarter
• Half
• Year
3. Click the next drop-down arrow to the right to see the choices for selecting what relationship
the interval shall have to the selected date.
Choose one to view in the display. The choices are as follow:
• Ending (the simulation shall end at the selected date – default)
• Beginning (the simulation shall begin at the selected date)
4. Change the date, if needed, to work well with your other Data Range selections
5. Click OK to refresh the scenario resource utilization table with data collected during the
defined interval.
6. Click Cancel Edit Interval to return to the previous data range for this scenario.
Working with scenarios 89