HP Matrix Operating Environment Software - Manual (Page 106)

3. Supply values for idle and maximum power usage when manual calibration is selected. (See
“Power calibration calculations” (page 129) for assistance in determining valid values for
particular systems.)
Procedure 5-90 Calibrating HP Insight Control power management (IPM)
• Click the “Calibrate” link.
Results are posted in the Last Attempted Auto-Calibration table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing
the error.
Procedure 5-91 Clearing current power management calibration values
• Click the “Clear Calibration Data” link.
Calibration values are deleted. Results are posted in the Last Attempted Auto-Calibration
table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing
the error.
Procedure 5-92 Updating iLO data and calibration
• Click the “Collect iLO Data” link.
The latest power usage data for this system is obtained and used to update the calibration
for this system. Results are posted in the Last Attempted Auto-Calibration table.
If an error is indicated, read the “Troubleshooting” and “Notes” column for help on fixing
the error.
Procedure 5-93 Configuring power management
1. Examine the Power Management Plug-in Configuration table.
2. In order of presentation, configure or correct each step listed in the table, as needed.
a.
Look at the icon in the Status column. If the status icon shows
• , then the step is working correctly.
• , then this step is not working correctly.
• , indicates waiting for a previous step to complete successfully.
b. Fix errors in the order that they appear in the table. Use the information in the Notes
column to determine what you need to do. Use the links in the Help column to resolve
the problem(s) for that step.
3. When all the icons show a green status, select Apply or OK to complete the power calibration
for the selected system .
106 Procedures