HP Matrix Operating Environment Software - Manual (Page 59)

To return to a planning checklist:
• Obtaining reports on current resource usage [p. 35]
Interpreting task results
The Task Results screen shows a “Running ” check box with a Start time: until the task
completes. When data collection finishes, you see an End time: displayed, with standard out
(stdout) and standard error (stderr) information on the data collection.
Once the Status field shows Complete, the collection task is complete, and the screen provides
a summary of pertinent information for this task, including the name of the task, completion
status, and the command line options used to run this task.
The results of the task are presented in the Stdout and Stderr tab windows. The messages on
the Stdout tab include indications of any errors that occur. Be sure to click both tabs for a complete
understanding of what happened.
An Exit code of 0 means complete success. Positive values indicate partial or complete failure.
In addition, you will see iconic indicators in the table Status column:
• When a task concludes successfully, you see this symbol: .
• When a task concludes with a global or system-specific error, you see either of these symbols
in the status column, respectively:
or .
Error notification on the standard out tab
While error messages are sent to the Stderr tab, the fact that errors have occurred is indicated
on the Stdout tab. The types of messages sent to the Stdout tab are explained below.
All physical CPU utilization data collected for Integrity VM "vm-name" from Integrity VM Host "host-name".
All corrected physical CPU utilization data collected for HyperV VM "vm-name".
All utilization data collected for "system-name"
Data collection succeeded. No need to check the Stderr tab if this is the only type of notification.
Some utilization data collected for "system-name"
Although data collection was not entirely successful, some utilization data was collected. Check
the Stderr tab for details of the problem.
Warning: message text.
A condition was detected while collecting that may affect the “usefulness” of the data collected.
Check the Stderr tab for details of the problem.
NN Warnings issued.
Appears at the end of output on the Stdout tab.
Warnings were issued. Check the Stderr tab for details.
Collection failed on NN systems.
Appears at the end of output on the Stdout tab.
No data was collected from one or more systems. Check the Stderr tab. For each of the failed
systems, there will be one or more messages, including the host name.
See also Appendix G (page 165) and “Capacity Advisor messages” (page 175) for additional
information to help you troubleshoot data collection errors.
As you review and analyze the resulting data collection, you may notice discrepancies. See
“Possible sources of discrepancies in collected data” (page 66) for information.
Gathering data for Capacity Advisor 59