GW Instek GDM-8300 series User Manual - Manual (Page 98)

GDM-834X Series User Manual
98
FILE (Existing File, see page 92)
NAME (File Name, see page 91)
COUNT (Count, see page 91)
TMODE (Time Mode, see page 93)
TIMER (Time Setup, see page 93)
DATE (Date Setup, see page 95)
5. After the DATE option is set, the DMM will
begin logging data.
The USB STO icon will flash slowly, indicating
the DMM is saving to USB.
6. To stop saving to USB, press SHIFT → MENU
again.
When the save operation has stopped, the USB
STO icon will stop flashing and will remain lit.
7. The USB stick can now be removed or another
save option can be performed.
WARNING
Do not remove the USB stick while the DMM is
saving to the USB drive.
Note
The USB STO icon will flash at a faster rate (~5
times/second) if there is no more space left on the
USB stick or if the automatically-incremented
filename suffix, XX, has reached its maximum
value, 99, and cannot be increased further.
Display
V
S DC
Recorded
Measurement
USB STO
icon
USBSTO