GW Instek GDM-8300 series User Manual - Manual (Page 84)

GDM-834X Series User Manual
84
USB Store Overview
The GDM-8342 is able to store measurement results to a USB stick.
The USB storage function also has comprehensive save options that
allow you to create a save file name, allow you to save up to a
specified number of reading counts as well as the option to
continue saving to a previously stored file instead of saving to a
new file.
Supported USB Sticks:
USB Disk Type: Flash Disk Only
FAT Format: Fat16 or Fat32(Recommended)
Max memory size: 32GB
Max record count in a recording: 5,000,000 records
Note Flash disks which need to use card adaptors are
not recommended to be used in this application.
CSV Format
Overview The GDM-8342 saves readings as a CSV file
(comma separated values) that can be easily
read using spreadsheet programs such as
Microsoft Excel. Each CSV file saves the
following information.
Parameters Time (dd) The elapsed number of days
since the start of the readings.
Time (hh:mm:ss) The elapsed time since the start
of the readings, in
hours:minutes:seconds
formatting.
1st Value The reading on the primary
display.