GW Instek GDM-8300 series User Manual - Manual (Page 129)

COMMAND OVERVIEW
129
[SENSe:]UNIT
Sets the temperature unit.
Parameter: C|F
Example: SENS:UNIT C
Sets the temperature unit to ˚C.
[SENSe:]UNIT?
Returns the temperature unit.
[SENSe:]FUNCtion[1/2]
Sets the function for the first or second display.
Parameter:
(display1):"VOLT[:DC]", "VOLT:AC", “VOLT:DCAC”,
"CURR[:DC]", "CURR:AC", “CURR:DCAC”, "RES", "FREQ",
"PER", "TEMP:TCO", "DIOD", "CONT", “CAP”
(display2): "VOLT[:DC]", "VOLT:AC", "CURR[:DC]",
"CURR:AC", "RES", "FREQ", "PER", "NON"
Example: SENS:FUNC1 "VOLT:DC"
Sets the 1
st display to the DCV function.
[SENSe:]FUNCtion[1/2]?
Returns the function displayed on the first or second display.
Return parameter:
(display 1): VOLT, VOLT:AC,VOLT:DCAC, CURR,
CURR:AC,CURR:DCAC, RES, FREQ, PER, TEMP:TCO, DIOD,
CONT, CAP
(display 2): VOLT, VOLT:AC, CURR, CURR:AC, RES, FREQ,
PER, NON