GW Instek GDM-8300 series User Manual - Manual (Page 153)

APPENDIX
153
Capacitance
Range Resolution Full Scale Test Current
Accuracy
(1 year 23˚C ±5˚C) [1]
5nF: 0.5~1nF [2]
0.001nF 5.100 8.3 μ A
2.0%+20
5nF: 1~5nF [2] 2.0%+10
50nF: 5~10nF [2]
0.01nF 51.00 8.3 μ A
2.0%+30
50nF: 10~50nF [2] 2.0%+10
500nF 0.1nF 510.0 83 μ A
2.0%+4 5 μ F 1nF 5.100 0.56mA
50 μ F 10nF 51.00 0.83mA
[1] For the 5nF ~ 50 μF range, make sure that the input is greater than 10% of the
range.
[2] Need to use the REL function.
* Input protection of 500V peak on all ranges.
Frequency
Measurement Range Accuracy (1 year 23˚C ±5˚C)
10Hz ~ 500Hz 0.01%+5
500Hz ~ 500kHz 0.01%+3
* AC + DC measurements do not allow frequency measurements.
* Input protection of 1000V peak on all ranges.
Voltage Measurement Sensitivity
Range
Minimum Sensitivity (RMS sine wave)
10~100kHz 100K~500kHz
500mV 35mV 200mV
5V 0.25V 0.5V
50V 2.5V 5V
500V 25V uncal
750V 50V uncal
Current Measurement Sensitivity
Range
Minimum Sensitivity (RMS sine wave)
30~20kHz
500 μA 35 μA
5mA 0.25mA
50mA 2.5mA
500mA 25mA
5 A 0.25A(<2kHz)
10 A 2.5A(<2kHz)