GW Instek GDM-8300 series User Manual - Manual (Page 79)

SYSTEM/DISPLAY CONFIGURATION
79
Input Resistance Settings
The 500mV and 5V DC voltage ranges can be set to an input
resistance of 10MΩ or 10GΩ. This setting is only applicable for DC
voltage.
Range Input resistance 10MΩ, 10GΩ
Default 10MΩ
Procedure 1. Press the MENU key.
2. Go to MEAS on level 1.
3. Go to INPUT R on level 2.
4. Set the input resistance to 10MΩ or 10GΩ
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the input
resistance menu.
Display
Input resistance
setting