GW Instek GDM-8300 series User Manual - Manual (Page 69)

OPERATION
69
Hold Measurement
The Hold Measurement function retains the current measurement
data and updates it only when it exceeds the set threshold (as a
percentage of the retained value).
Applicable
measurements The hold function can be used with the
following basic measurement functions:
ACV, DCV, ACI, DCI, Ω, Hz/P, TEMP
Procedure 1. Press the HOLD key.
2. The measurement reading appears on the
primary display and the hold threshold on the
secondary display.
Display
V
HOLD S AC
Measurement
reading
Hold
threshold
Set the Hold
Threshold Use the Up and Down arrow keys to select a
hold threshold level, as a percentage.
Range 0.01%, 0.1%, 1%, 10%
Deactivate Hold
Measurement Press the HOLD key for 2 seconds to deactivate
the hold measurement, or simply activate
another measurement function.