GW Instek GDM-8300 series User Manual - Manual (Page 88)

GDM-834X Series User Manual
88
Long Record Mode
Overview If users need long-term data records, the Long
Record Mode can be used to log test data for a
long period of time. In this mode, the Rate is set
by the system to the slow rate and the refresh
rate is set to 1 data refresh per second
(excluding dual measurement, ACI+DCI and
ACV+DCV modes).
Normal The Normal setting is the regular record mode.
The longest recordable time depends on the
refresh rate that is chosen; the longest
recordable time (in seconds) equals
5,000,000/refresh rate.
Long In the long record mode, a fixed record speed of
one record per second will be logged into the
log file; the longest recordable time is 5,000,000
seconds.
Procedure 1. Press the MENU key.
2. Go to USBSTO on level 1.
3. Go to RECORD on level 2.
4. Set RECORD to NORMAL or LONG.
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the MODE
menu.