beautypg.com

Save to usb (advance mode) – GW Instek GDM-8300 series User Manual User Manual

Page 97

background image

USB STORE

97

5. The USB stick can now be removed or another

save operation can be performed.

WARNING

Do not remove the USB stick while the DMM is
saving to the USB drive.

Note

The USB STO icon will flash at a faster rate (~5
times/second) if there is no more space left on the
USB stick or if the automatically-incremented
filename suffix, XX, has reached its maximum
value, 99, and cannot be increased further.

Display

V

S

DC

Recorded

Measurement

USB STO

icon

USBSTO

Save to USB (Advance Mode)

Overview

The procedure below describes the save
operation when the Mode is set to Advance.

Procedure

1. Insert a USB stick into the USB Host port on the

front panel.

2. If the USB stick is recognized by the DMM, the

USB STO icon will be lit. This indicates that the
DMM is ready to save files to the USB stick.

3. Press SHIFT → MENU.

4. Each Advance mode setting will now appear

one after the other. Set each option and press
the Enter key to continue to the next option.

The following options will appear in order: