GW Instek GDM-8300 series User Manual - Manual (Page 73)

OPERATION
73
decimal point.
3. Press Enter to confirm the M factor settings and
to automatically move onto the B offset setting.
4. Edit the B offset in the same fashion as the M
factor was edited.
5. Press Enter to confirm the B offset setting and
to begin the MX+B measurement.
Display
MX+B meausurement
reading
MX+B math
indicator
S DC
V
AUTO
MATH m
Deactivate Math
Measurement Press SHIFT → MX/MN to deactivate the
MATH function, or simply activate another
measurement function.
Measure 1/X
Procedure 1. Press SHIFT → MX/MN to enter the MATH
menu.
The MX+B setting appears.
2. Press the Down key twice to skip past MX+B
settings and go to the 1/X settings.
1/X will be flashing in the secondary display.