GW Instek GDM-8300 series User Manual - Manual (Page 82)

GDM-834X Series User Manual
82
Restore Factory Default Settings
The factory default settings can be restored at anytime from the
System menu. Please see the Appendix on page 144 for a list of the
factory default settings.
Range Factory DEF YES, NO
Procedure 1. Press the MENU key.
2. Go to SYSTEM on level 1.
3. Go to FACTORY on level 2.
4. Set the (FACTORY) DEF setting to YES or NO.
Choosing YES will restore the factory default
settings.
5. Press the Enter key to confirm and to restore
the factory default settings immediately.
Display Factory default setting