GW Instek GDM-8300 series User Manual - Manual (Page 58)

GDM-834X Series User Manual
58
Using Dual Measurement Mode
Procedure 1. Choose one of the basic measurement functions
from the table above to set the measurement
mode for the primary display.
For example, press DCV to set the first display
to DCV measurement.
2. To set a measurement mode for the second
display, press the 2ND key and then select the
second measurement mode.
For example, press 2ND, SHIFT, ACV to select
ACI measurement for the second display.
Display
2ND
AUTO AC
S AUTO
Indicators for 1
st
measurement
2nd measurement
and unit
Indicators for 2
nd
measurement
1st measurement
and unit
V
DC
A m