GW Instek GDM-8300 series User Manual - Manual (Page 125)

COMMAND OVERVIEW
125
MEASure:CONTinuity?
Returns the continuity measurement on the first display.
Example: MEAS:CONT?
Returns the continuity.
MEASure:DIODe?
Returns the diode measurement on the first display.
Example: MEAS:DIOD?
Returns the diode measurement.
MEASure:TEMPerature:TCOuple?
Returns the temperature for the selected thermocouple type on
the first display.
Parameter:[NONE] | J | K | T
Example: MEAS:TEMP:TCO? J
> +2.50E+1
Returns the temperature.
MEASure2:VOLTage:DC?
Returns the DC voltage measurement on the second display.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: MEAS2:VOLT:DC?
>+0.488E-4
Returns the DC voltage measurement as 0.0488 mV.
MEASure2:VOLTage:AC?
Returns the AC voltage measurement on the second display.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: MEAS2:VOLT:AC?
>+0.511E-3
Returns the AC voltage measurement as 0.511 mV.