GW Instek GDM-8300 series User Manual - Manual (Page 133)

COMMAND OVERVIEW
133
CALCulate:MATH:MBFactor
Sets the offset factor B for math measurements.
Parameter: | MIN | MAX
Example: CALC:MATH:MBF MIN
Sets the offset factor B to the minimum allowed value.
CALCulate:MATH:MBFactor?
Returns the offset factor B used in the math measurement.
CALCulate:MATH:PERCent
Sets the reference value for the Percent function.
Parameter: | MIN | MAX
Example: CALC:MATH:PERC MAX
Sets the reference value for the Percent function to the maximum.
CALCulate:MATH:PERCent?
Returns the reference value setting for the Percent function.
CALCulate:NULL:OFFSet
Sets the reference value for the relative function. This command
is analogous to the CALCulate:REL:REFerence command.
Parameter: | MIN | MAX
Example: CALC:NULL:OFFS MAX
Sets the reference value to the maximum allowed.
CALCulate:NULL:OFFSet?
Returns the reference value from the relative function. This
query is analogous to the CALCulate:REL:REFerence? query.