GW Instek GDM-8300 series User Manual - Manual (Page 120)

GDM-834X Series User Manual
120
CONFigure2:VOLTage:AC
Sets measurement to AC Voltage on the second display and
specifies the range.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: CONF2:VOLT:AC
Sets the measurement mode to AC voltage.
CONFigure2:CURRent:DC
Sets measurement to DC Current on the second display and
specifies the range.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: CONF2:CURR:DC 50e-3
Sets the DC current range to 50mA on the second display.
CONFigure2:CURRent:AC
Sets measurement to AC Current on the second display and
specifies the range.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: CONF2:CURR:AC 50e-2
Sets the measurement mode to ACI with a 500mA range on the
second display.
CONFigure2:RESistance
Sets measurement to 2W Resistance on the second display and
specifies the range.
Parameter: [None] | [Range( | MIN | MAX | DEF)]
Example: CONF2:RES 50e3
Sets the range to 50kΩ on the second display.