GW Instek GDM-8300 series User Manual - Manual (Page 68)

GDM-834X Series User Manual
68
Manually Set the
Relative
Reference Value 1. To manually set the relative reference value,
press SHIFT → REL.
The REL value is displayed on the screen at full
scale.
2. Use the Left and Right arrow keys to navigate
to the digit to be edited or to select the decimal
point.
Use the Up and Down arrow keys to edit the
selected digit or to place the position of the
decimal point.
V
3. Press the Enter key to confirm, alternatively
press Exit to cancel setting the relative reference
value.
Display
V
Relative
value setting
REL setting
mode
Deactivate
Relative
Measurement Press the REL key again to deactivate the
Relative measurement mode, or simply activate
another measurement function.