GW Instek GDM-8300 series User Manual - Manual (Page 131)

COMMAND OVERVIEW
131
CALCulate:HOLD:REFerence
Sets the percentage threshold for the Hold function.
Parameter: (0.01, 0.1, 1, 10)
Example: CALC:HOLD:REF 10
Sets the hold percentage to 10%.
CALCulate:HOLD:REFerence?
Returns the percentage threshold from the Hold function.
CALCulate:REL:REFerence
Sets the reference value for the relative function.
Parameter: | MIN | MAX
Example: CALC:REL:REF MAX
Sets the reference value to the maximum allowed.
CALCulate:REL:REFerence?
Returns the reference value from the relative function.
CALCulate:LIMit:LOWer
Sets the lower limit of the compare function.
Para meter: | MIN | MAX
Example: CALC:LIM:LOW 1.0
Sets the lower limit to 1.0
CALCulate:LIMit:LOWer?
Returns the lower limit of the compare function.
CALCulate:LIMit:UPPer
Sets the upper limit of the compare function.
Para meter: | MIN | MAX
Example: CALC:LIM:UPP 1.0
Sets the upper limit to 1.0