Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 79)

Fieldwork
71
b. Tap ,QVHUW« and
enter a new point
using the
General and
Location cards with the
following values, as
shown:
Point Name : 2
Northing : 5050
Easting : 5050
Elevation : 100
Description : Backsight
and then tap OK.
4. Set up your backsight. In this example, we will
setup on Point 1 and backsight Point 2, which was
just created.
a. Access the
6XUYH\ , %DFNVLJKW 6HWXS screen.
b. In the Occupy Point field, enter 1 as the point
name.
Tip: You can also select an existing point from a map
view or from a list by using the
power button.
c. Enter an HI and HR of 5 feet each.
d. Toggle the
%6 'LUHFWLRQ
/
%6 3RLQW
button to
%6 3RLQW and enter 2 as the point name.
e. Leave the Fixed HR at Backsight field unchecked.
f. Confirm that the Backsight Circle value is zero. If it displays a
non-zero value, tap the &LUFOH« button and set it to zero.