Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual
Page 162
User’s Manual
154
1.
Tap
&RJR , 3UHGHWHUPLQHG $UHD from the Main
Menu.
2.
Enter the first point that defines one of the sides of
your three-sided boundary in the
Point 1
field.
3.
Define the direction of this side of the boundary that
will intersect with the endpoints of the computed
line. For this example, you would tap the second
power button
and select
Choose From Map…
and
then tap Points 7 and 1.
4.
Enter the second point that intersects with the other
side of the boundary in the
Point 2
field and assign it
an azimuth of 0 in the field below.
5.
If you want to store points where the computed line
intersects with the two sides, check each
Store Pt
box
and specify point names in the corresponding fields.
6.
Define the area of the boundary in the next field (7 acres in this
example) and select the
Parallel
radio button.
7.
Tap
6ROYH. The final boundary side will be computed
and the data can be viewed by using the
Results
and
Map
tabs. If you selected to store points, the
computed points will also be stored.