Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual

Page 153

Screen Examples

145

Enter the horizontal width of the left and right sides
of the road in the

1/2 Road Width

fields. These

widths do not have to be the same.

Enter the cross-slopes of each side of the road in the

X-Slope (%)

fields.

Note: A negative X-Slope value will result in a slope
where water runs from the centerline of the road toward
the edge.

If the road profile also includes a curb or a ditch,
check the

Stake Curb / Ditch

checkbox and define the

curb or ditch as follows.

If defining a ditch enter the depth of the ditch as a

negative value in the

Height

field. If defining a curb, enter the

height of the curb as a positive value in the

Height

field.

Enter the horizontal width of the curb or ditch in the

Offset From

Edge of Road

field.

Note: You can tap in the graphic portion of the screen to open the
graphic in a larger window.

10.

Tap

1H[W ! to continue to the next screen.

11.

Enter the first station that you want to stake in the

Station

field. This station will be referenced from the

Begin Station

, assigned to the starting point of the

centerline earlier.

12.

Enter the distance between each station that you
want to stake in the

Station Interval

field.

13.

Enter the

Cut Slope

and

Fill Slope

in the respective

fields. These slopes will be used to compute the
location of the catch point for either cut or fill
situations.