Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 39)

Getting Started
31
distances are not measured during reverse shots.
Enable Automatic Repetition : when checked, all remaining shots
after the first shot to the backsight and foresight will occur
automatically when using a motorized instrument.
Shooting Sequence : specifies the order that the shots are taken from
the following options:
•
BS > FS ^ FS > BS : Backsight, Foresight, reverse Foresight
Backsight
•
BS > FS ^> BS > FS : Backsight, Foresight, reverse Backsight,
Foresight
•
BS ^ BS > FS ^ FS : Backsight, reverse Backsight, Foresight,
reverse Foresight
•
FS ^ FS > BS ^ BS : Foresight, reverse Foresight, Backsight,
reverse Backsight
•
FS > BS ^ BS > FS : Foresight, Backsight, reverse Backsight,
Foresight
•
FS > BS ^> FS > BS : Foresight, Backsight, reverse Foresight,
Backsight
Date/Time Settings
The Date/Time Settings is used to set the date and time
in the Survey Pro.
Date : displays the current date.
Time : displays the current time.
Format : Select Local to display your local time, or UTC to
display Coordinated Universal Time.
Note: The date, time and UTC are computed using
System Date and Time properties.
6HW 'DWH : will set the system date with the date that is
entered.