Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 170)

User’s Manual
162
Aim the Total Station
14. Using the information displayed on the screen, aim
the total station toward the design point and tap
6WDNH !. The graphic portion of the screen shows the
curve, backsight direction and design point location
relative to the total station.
Stake the Point
15. The final screen allows you to stake the current
station. With the rod positioned where you want it,
tap the
6KRW button to take a shot. If necessary,
move the rod and take another shot until it is over
the design point.
16. Tap the 6WRUH button to save the stake point. You
will automatically be returned to the second screen
(Step 9) where you can then tap the
1H[W 6WD button
to advance the current station by the station interval
and stake the next point.