Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 121)

DTM Stakeout
113
a. All the polylines in the current
job are displayed. Select the
appropriate polyline and tap OK
to return to the Setup DTM 3D
screen.
8. If a boundary is used, you must also select
one of the two radio buttons in the Setup
DTM 3D screen:
Exclude points… : will move any objects
that occur outside the selected boundary to the
Auxiliary layer.
Discard the boundary… : will initially
move any points that exist outside the boundary
to the Auxiliary layer. If a point is later stored
outside the boundary, the selected boundary is
automatically unselected.